Granny flat funding and returns in Australia
A granny flat or secondary dwelling is a separate or attached smaller home on the same property as a principal home. People searching for a granny flat loan, granny flat finance, a granny flat loan calculator or a home equity loan for a granny flat can use this page to compare a funding and rental-return scenario from their own figures. A secondary dwelling may be intended for family, another household or rental use, subject to planning, building, title and tenancy requirements. This calculator does not confirm that a dwelling can be built, rented, financed or occupied in a particular way.
Funding paths and usable equity
Common funding paths include releasing equity through a home-loan top-up, a construction loan, paying with cash, or using a personal or green loan. A home-loan top-up may use the property as security; a personal loan may have a different rate and shorter term. A construction loan can release funds in stages. Cash avoids new borrowing in this model, but does not remove the project cost.
The equity illustration uses 80% of the estimated property value after completion, less the current loan balance, with usable equity floored at zero. This is a scenario ceiling, not a lender limit or promise. The new loan is the current balance plus the selected extra borrowing. For loan methods, the full entered build cost is added; for cash, no borrowing is added. The model does not automatically increase the property's value by the build cost. Keep the after-completion value equal to the current value unless you have a reasoned estimate to enter.
If the new LVR is above 80%, lenders mortgage insurance may apply, but this tool does not estimate a premium. Above 100% LVR, a lender may need a higher on-completion valuation. A lender may instead use a lower valuation, require more equity, or decline a proposed structure. Confirm the valuation and funding conditions with the lender before signing a building contract.
Repayments and the construction period
The extra borrowing is modelled as a monthly principal-and-interest loan over the selected term. The starting home-loan assumptions are 6.63% p.a. and 30 years, based on the Canstar owner-occupier variable P&I overall average and date supplied for this draft. An investment average of 6.89% was also supplied as a comparison. The personal or green loan starting assumption is 12.26% p.a. over five years, with the date supplied for this draft. These are editable scenario values, not lender offers; rates and product definitions change. The Canstar source page and the supplied average figures should be checked again before publication.
For a construction-loan method, the repayment shown is post-completion P&I on the extra borrowing only. Interest during construction, staged drawdowns, capitalised interest and lender progress-payment rules are not modelled. The separate construction loan calculator illustrates build-period interest and a repayment after completion, using a generic draw schedule.
Rent, yield and payback
Enter a weekly rent estimate from a local appraisal. Gross annual rent is weekly rent multiplied by 52. Gross yield divides that rent by build cost; net rental return subtracts only the annual rates, insurance and maintenance you enter, and net yield divides the result by build cost. Both yields exclude land. The assessable rental-income line applies your selected shading percentage to gross rent. It is a separate lender-policy illustration and is not used to reduce the displayed yield or cash flow.
The rental-shading default is 80%, based on Firstmac’s publicly stated “up to 80%” granny-flat rental policy in its October 2026 policy document. This is not a market-wide rule. A lender may shade rent more heavily, require a completed and compliant dwelling, or exclude proposed rent. Edit the assumption to match current lender guidance. The cash-flow line subtracts annual P&I on the extra borrowing from net rental return; it is not a full household cash-flow or tax model.
Simple payback divides build cost by positive net rental return. It is before tax, vacancy, land, financing costs beyond the displayed extra repayments, and loan principal. If net rental return is zero or negative, or build cost is zero, payback is not available. Actual results can differ due to vacancy, repairs, insurance, utilities, strata, interest, ownership, tax and changes in rent.
Build costs and local rent are not quotes
Hipages’ guide, updated 23 January 2026, describes granny-flat costs of $80,000–$160,000, with high-spec projects over $200,000. Builtly’s October 2026 construction-only bands are $135,000–$195,000 for one bedroom and $175,000–$260,000 for two bedrooms. Site works, design, utility connections, approvals and other extras can add cost. The calculator’s $200,000 build-cost default is a mid-range 2026 assumption supplied for this draft; replace it with your builder’s quote.
The supplied Greater Sydney reference is a detached one-bedroom median of $550 per week from NSW Fair Trading bond data for July–September 2026, reported by grannyflatnumbers.com and updated 23 October 2026. It is not a forecast for another suburb or property. Enter a local appraisal and test a lower-rent case. A positive model result does not guarantee a tenant or continuous occupancy.
Planning and tax checks
Victoria’s planning guidance describes small second dwellings up to 80 m² under rules in effect from 15 October 2026 and says there are no restrictions on who can live in one under the cited rules; rental laws still apply. NSW says a secondary dwelling cannot be subdivided from its principal dwelling under the Housing SEPP. Confirm current local planning, building, fire, service and rental requirements before relying on income. These are brief planning notes, not legal advice.
Capital gains tax, the main-residence exemption, Centrelink treatment of a granny-flat interest, negative gearing and personal tax are outside this calculator. Get independent tax, legal and financial advice for your circumstances. The model does not decide whether a cost is deductible or a property qualifies for an exemption.
Sources and supplied checking dates
- Canstar home-loan average interest rates — the 6.63% owner-occupier and 6.89% investment figures were supplied as at 2 October 2026.
- Canstar personal-loan comparison — the 12.26% personal-loan figure and 16 November 2026 check date were supplied for this draft.
- Firstmac Residential Lending Policy (PDF) — rental-shading context supplied as October 2026.
- Hipages granny-flat cost guide — updated 23 January 2026.
- Builtly granny-flat cost guide — October 2026.
- Granny Flat Numbers — the supplied NSW Fair Trading bond-data summary was updated 23 October 2026.
- Victoria Planning: Small second homes and NSW Planning: Secondary dwellings.
The Canstar average-rate figures and the secondary-source rent summary have not been independently confirmed for publication in this change. Confirm them, the source dates and local planning rules before publishing. Estimate only — not a quote, approval, credit assessment, or tax or financial advice.
