Skip to content
Fundd
Last updated

Reviewed by the Fundd team Last reviewed

Income needed to borrow calculator

Want to know how much do I need to earn to borrow $700,000? Compare the income needed for a $500k / $700k / $1m home loan. This is borrowing power in reverse: an estimate from your rate, household budget, debts and dependants.

Your scenario

Calculate income for
$
% p.a.
$
Household
$
$

Enter a realistic household minimum. A verified household benchmark, when configured, can increase this floor. This is not the proprietary HEM index.

$

Editable scenario assumption, not a published benchmark.

$
Include a HECS-HELP balance?

Optional. The estimate uses the repayment income you enter and the ATO 2026–27 repayment schedule.

Required gross household income per year (Estimate)

$130,902

Verified reference table "income-tax", effective 01/07/2026.

How we estimate this: we test repayments at your interest rate plus a 3% buffer, similar to the buffer lenders use. Income tax is estimated using 2026–27 resident tax rates and the 2% Medicare levy, but doesn't include the low income tax offset or Medicare levy low-income relief, so the income shown may be a little higher than you need if your income is low. Lenders' own assessments, assessment-rate floors and debt-to-income limits vary.

Target loan amount used
$600,000
Monthly repayment at assessment rate
$4,828
Repayment as a share of required gross income
44.26%
Assessment rate
9%
Assessed monthly living expenses
$3,000
Existing monthly debt repayments
$0
Monthly credit card commitment (3.8% of limit)
$380
Income for our conservative estimate (90% of borrowing power) to reach this loan
$140,984
Estimated monthly household income after tax
$8,208

Model notes and assumptions

  • Uses the same borrowing-power model and ATO resident tax schedule effective 2026-07-01 (https://www.ato.gov.au/tax-rates-and-codes/tax-rates-australian-residents); the built-in 2026–27 schedule was checked on 5 November 2026. A standard 2% Medicare levy applies.
  • The assessment rate is the entered rate plus 3 percentage points. A couple is modelled as two equal gross incomes and each applicant is taxed separately. HELP is included only when you enter the balance and ATO repayment income.
  • The conservative line solves for the gross income where 90% of modelled borrowing capacity reaches the target loan. This is a scenario estimate, not a lender serviceability test or approval.
  • Credit cards use an illustrative 3.8% of total limits each month. A verified matching household benchmark can raise assessed expenses; otherwise the entered expense floor and per-dependant allowance apply. This is not the proprietary HEM index.
  • Estimate only. General information, not financial advice. Entered rates and costs are scenario assumptions unless a current source is identified; no lender offer or approval is implied.
  • Scenario estimate only, not a lender quote, approval, tax calculation or personalised advice. Rates and fees are held constant.
  • Figures are estimates for general information only, not a loan offer or credit assessment.
Email me a copy of these results

Email me this report

Get a copy of these numbers in your inbox.

Speak to a broker

Optional broker enquiry

Request broker contact without sending your calculator inputs or results. This form does not unlock or gate the calculator.

Next step

Talk through your income needed to borrow options

A Fundd broker can help you understand how these estimates relate to your circumstances and lender requirements.

How this income needed to borrow calculator works

Estimate the household gross income needed to support a target loan or purchase using your entered debts, living costs and dependant assumptions. This tool is designed for Australian borrowers who want to compare a financial scenario before making an application or changing an existing arrangement. It produces an estimate from the values you enter, rather than searching lender products or checking your personal credit file. You can use it without treating a result as an approval, a promise of future returns or a recommendation.

How the result is calculated

The target loan is entered directly or calculated as purchase price less deposit. The model applies the same borrowing-power calculation: monthly principal-and-interest repayments use the entered rate plus a 3 percentage-point assessment buffer and the selected term. Each applicant’s income is taxed using the ATO resident schedule for 2026–27 plus a flat 2% Medicare levy. The solver finds the gross household income whose modelled capacity reaches the target, including entered living expenses, the household floor, dependant allowance, existing repayments, 3.8% of card limits per month and any optional HELP repayment. Couples are split into two equal gross incomes and taxed separately.

A worked Australian example

For a $700,000 target loan with the default single-household inputs, the estimate is about $146,259.51 gross household income per year, shown as $146,260. The defaults are a 6% proposed rate, 9% assessment rate, 30-year term, $3,000 monthly living expenses and floor, no dependants or other debts, $10,000 total card limits, and no HELP debt. A couple with the same loan and other defaults is estimated at about $131,159.26 total gross income. These are scenarios, not lender approval.

Understanding the inputs

  • Calculate income for: Choose the option that matches the scenario you want to test.
  • Quoted or assumed loan rate: No lender rate is prefilled. Enter a rate from a current quote or a clearly labelled scenario assumption.
  • Loan term (years): Enter the relevant whole-number period or count.
  • Existing monthly debt repayments: Enter the Australian dollar amount before display rounding.
  • Household: Choose the option that matches the scenario you want to test.
  • Dependants: Enter the relevant whole-number period or count.
  • Monthly household living expenses: Enter the Australian dollar amount before display rounding.
  • Monthly allowance per dependant: Editable household budget assumption; not a published benchmark.

Keep annual and monthly amounts separate. If you know an annual expense, divide it by twelve before putting it into a monthly expense field. Do not enter a repayment both as a living expense and an existing debt commitment. Where several buyers or debts are entered, check each row rather than assuming the starting example matches your situation. Empty or invalid fields should be corrected before a result is available.

Factors outside this estimate

Actual HEM is proprietary and lenders apply their own income, family composition, expense floors and assessment policies. The editable expense floor here is not the proprietary HEM index. Rental income shading, tax offsets, deductions and special income rules are not modelled. Lender assessment-rate floors and debt-to-income limits can further change the result.

Comparing scenarios responsibly

Start with a realistic baseline and change one input at a time. This helps separate the effect of a higher interest rate, a different time period or an additional contribution. Then test a less favourable scenario rather than treating the initial example as the only possible outcome. A projection with constant rates is useful for comparison, but real rates, fees, property values and household circumstances can change over time.

Look beyond the largest headline number. Check the total cost, the period covered, any funding shortfall and the assumptions that drive the result. A strategy that improves one measure can worsen another, such as reducing monthly payments while extending the time debt remains outstanding. Keep sufficient room for expenses that are outside the model and obtain current written quotes for costs you cannot reasonably estimate.

Reports, privacy and next steps

The detailed report records the scenario you entered and the resulting model output. It is a snapshot, not a continuously updated assessment. If you change your inputs after requesting a report, request a new summary to keep like-for-like records. The report form asks separately whether you want broker contact and whether you want marketing; neither optional consent is a condition of understanding this calculator.

A Fundd broker can discuss lending requirements and help identify the evidence needed for an assessment. Legal, tax and financial planning questions may require an appropriately qualified independent adviser. Before acting, confirm relevant figures against your own documents and the applicable lender or government source. The content and examples on this page are draft general information until reviewed for publication.

Sources and checking your figures

See the relevant official guidance for additional context. The external guidance links used for these new pages were checked on 4 November 2026; the source page may show a different last-updated date. Where a result uses an editable reference table, the model notes identify its source and checked date. If a verified rate is missing, an entered quote or assumption is labelled rather than represented as a current market rate. Do not use a calculator display date as proof that an external fee or policy has not changed.

Frequently asked questions

What income is needed for a $500k / $700k / $1m home loan, and how much do I need to earn to borrow $700,000?

For the $700,000 worked example using the default single-household inputs, the estimate is $146,259.51 gross per year (shown as $146,260). The model uses a 6% scenario rate plus a 3 percentage-point buffer, 30 years, $3,000 monthly expenses and floor, $10,000 card limits, no dependants, debts or HELP. Change the inputs to compare the income needed for a $500k, $700k or $1m home loan. This is borrowing power in reverse, not a lender serviceability decision or approval.

How is the income needed to borrow estimate calculated?

The target loan is entered directly or calculated as purchase price less deposit. The model applies the same borrowing-power calculation: monthly principal-and-interest repayments use the entered rate plus a 3 percentage-point assessment buffer and the selected term. Each applicant’s income is taxed using the ATO resident schedule for 2026–27 plus a flat 2% Medicare levy. The solver finds the gross household income whose modelled capacity reaches the target, including entered living expenses, the household floor, dependant allowance, existing repayments, 3.8% of card limits per month and any optional HELP repayment. Couples are split into two equal gross incomes and taxed separately.

Which assumptions can change my income needed to borrow

Actual HEM is proprietary and lenders apply their own income, family composition, expense floors and assessment policies. The editable expense floor here is not the proprietary HEM index. Rental income shading, tax offsets, deductions and special income rules are not modelled. Lender assessment-rate floors and debt-to-income limits can further change the result.

Are these Australian dollar amounts and current lender rates?

Amounts are in Australian dollars. Displayed amounts are rounded to whole dollars while calculations retain precision. Editable rates are scenario assumptions unless a matching verified source is explicitly identified. They are not lender offers.

Can I save or email my calculator results?

Use the report form to request an emailed summary of your inputs, headline results and assumptions. Email acceptance is reported separately from saving the enquiry. Broker contact and marketing consent are separate optional choices.