Skip to content
Fundd
Last updated

Reviewed by the Fundd team Last reviewed

Kit home loan calculator

Estimate the gap from a kit price to the all-in project cost, how much a construction or owner-builder loan might cover, and the cash still needed. Scenario only.

Your scenario

$

Mid-range 2026 assumption based on Going Rate's $45,000–$160,000 kit-only range, reviewed November 2026, and Habitat Tonic's 2026 three-bedroom kit guide of $80,000–$140,000 — replace with your quote.

$

Going Rate's November 2026 illustrative default — replace with your quote.

$

Enter labour to erect the kit if you will hire it — left at $0 so it is not guessed. Habitat Tonic says trades on an average three-bedroom home, including electrical, plumbing and often slab and frame assembly, can run $40,000–$80,000.

$

Enter licensed plumbing and electrical quotes — left at $0 so they are not guessed. The Quote Yard's 2026 NSW granny-flat kit range is $18,000–$40,000 and may be low for a larger home.

$

Going Rate's November 2026 illustrative default — replace with your quote.

$

Going Rate's November 2026 illustrative services-connection default — replace with your quote.

$

Enter kitchen, bathroom, fit-out, delivery, contingency or other items not in the lines above — left at $0 so they are not guessed.

$

Illustrative assumption for land already owned or used as security.

$
$

Starts equal to land value and follows it until you edit it. The all-in build cost is not added automatically; use a reasoned valuation estimate.

%

Usual LMI threshold. Westpac's broker construction flyer (current as at 23 February 2026) and Helia's LMI guidelines (effective 10 August 2026) allow up to 95% LVR for licensed-builder construction or a fixed and connected prefabricated kit home, subject to product limits and LMI. Edit if your lender uses a different cap.

% p.a.

Canstar average variable owner-occupier P&I rate as at 17 November 2026, reported by Australian Broker from the Canstar Rate Tracker — edit to your loan.

Illustrative post-completion P&I term — edit to match the lender quote.

All-in project cost

$150,000.00

Estimate only — not a quote, approval, credit assessment, or tax or financial advice.

This shows post-completion P&I only; interest during construction is not modelled. See the construction loan calculator for a separate drawdown scenario.

This kit-home estimate covers supplier kit costs plus assembly. The modular / prefab funding calculator instead illustrates CommBank’s public assessed-manufacturer offsite limits.

Gap between kit price and all-in cost
$50,000.00
Maximum total loan
$320,000.00
Amount available for the build
$320,000.00
Loan for the build
$150,000.00
Cash still needed
$0.00
Total loan after completion
$150,000.00
New LVR
37.5%
Monthly P&I on the build loan (post-completion)
$996.95
Annual P&I on the build loan (post-completion)
$11,963.36
Monthly P&I on the total loan (post-completion)
$996.95
Annual P&I on the total loan (post-completion)
$11,963.36

Model notes and assumptions

  • Estimate only — not a quote, approval, credit assessment, or tax or financial advice.
  • Repayments are post-completion principal and interest only. Interest during construction, draw timing and lender progress-payment rules are not modelled.
  • The 80% licensed-builder and 60% owner-builder defaults are editable scenarios, not universal lender limits or approvals.
  • Estimate only. General information, not financial advice. Entered rates and costs are scenario assumptions unless a current source is identified; no lender offer or approval is implied.
  • Scenario estimate only, not a lender quote, approval, tax calculation or personalised advice. Rates and fees are held constant.
  • Figures are estimates for general information only, not a loan offer or credit assessment.
Email me a copy of these results

Email me this report

Get a copy of these numbers in your inbox.

Speak to a broker

Optional broker enquiry

Request broker contact without sending your calculator inputs or results. This form does not unlock or gate the calculator.

Next step

Talk through your kit home loan options

A Fundd broker can help you understand how these estimates relate to your circumstances and lender requirements.

Kit home costs and finance in Australia

A kit home is a materials package, not usually a completed house. It may include a frame, cladding, roofing, windows and plans, but supplier inclusions vary. This calculator compares your kit quote with extra work and project costs; it is not a builder, lender or insurer quote.

Why the kit price is not the all-in cost

All-in cost adds kit price, slab or site works, assembly labour, licensed plumbing and electrical, approvals and engineering, service connections and other entered items. Delivery, fit-out, drainage, access, retaining, utility upgrades and contingency may need separate quotes. Check the written inclusions.

Going Rate’s guide, reviewed November 2026, lists kit-only prices around $45,000–$160,000 and illustrative defaults of $25,000 for site works, $15,000 for services and $10,000 for approvals or engineering. It says a finished, approved and connected home may cost 1.5–2 times the kit price. Habitat Tonic’s 2026 structure-only guide gives about $35,000–$60,000 for a studio or one-bedroom, $50,000–$90,000 for two bedrooms, $80,000–$140,000 for three bedrooms and from $120,000 for four bedrooms. Finished-home examples are higher; its trade estimate for an average three-bedroom is $40,000–$80,000.

The Quote Yard’s 2026 NSW granny-flat ranges are $35,000–$90,000 for a kit, $18,000–$45,000 for a slab, $15,000–$35,000 for hired erection, $18,000–$40,000 for plumbing and electrical, and $4,000–$9,000 for approvals. These smaller-dwelling figures may be low for a larger home. Defaults are starting assumptions; replace them with quotes. A zero means no cost was entered, not that work is free.

Construction and owner-builder funding

A licensed-builder construction loan may use a fixed-price contract and staged progress payments; owner-builder lending is narrower and some lenders do not offer it. Westpac’s broker flyer, current as at 23 February 2026, describes up to 95% LVR for licensed-builder construction and 60% for owner-builders. Helia’s guidelines, effective 10 August 2026, allow up to 95% for eligible licensed-builder construction and fixed, connected prefab kits. For owner-builder LMI, Helia caps construction at 50% of expected completion value and lists work above 50% of the lesser of cost or valuation as unacceptable. Bluestone says it does not lend to owner-builders. These are provider-specific, not universal rules.

The editable defaults are 80% for licensed-builder and 60% for owner-builder scenarios—not approvals or universal caps. Helia’s 50% is a separate insurer limit. LMI may apply above 80%, but no premium is calculated. Confirm current lender and insurer rules, builder eligibility and contract requirements.

The value used for the estimate

The on-completion value starts equal to land value and follows it when land value changes, until you edit it. The model never adds the kit or all-in cost to land automatically. A lender or insurer may use its own valuation, the lesser of cost or value, and other criteria. Enter a reasoned estimate and test lower values too.

Maximum total loan is selected LVR multiplied by completion value. Amount available for the build subtracts the existing land loan, with a floor of zero. The build loan is capped at the lower of available funds and all-in cost; the rest is cash still needed. An existing loan at the LVR ceiling can leave no build funds.

Repayments and what is not modelled

Monthly P&I is calculated separately for the build loan and total loan at the 6.99% scenario rate and 30-year term. The rate is Canstar’s average variable owner-occupier P&I as at 17 November 2026, reported by Australian Broker from the Canstar Rate Tracker—not an offer. Replace it with your quote. Repayments are post-completion only; construction-period interest, staged drawdowns, fees and progress claims are not modelled. See the construction loan calculator for a generic drawdown illustration.

This is not the modular / prefab funding calculator. That page illustrates CommBank’s public assessed-manufacturer offsite limits. This page covers supplier kit costs plus assembly and an entered construction or owner-builder LVR scenario.

Sources

Licensed trades must do regulated plumbing and electrical work. Owner-builder permits and approvals vary by state; check the regulator and council. Replace defaults with quotes and a suitable valuation. General information only; not a quote, approval, credit assessment, tax or financial advice.

Frequently asked questions

What is not included in a kit home price?

It depends on the supplier. A kit price may cover materials and plans but exclude the slab, site preparation, assembly labour, licensed plumbing and electrical, connections, approvals, delivery and fit-out. Compare the written inclusions and get quotes for each missing item.

How much might a construction loan cover?

This calculator applies the maximum LVR you enter to the on-completion value, subtracts the existing land loan and compares the remaining amount with the all-in cost. Lenders set their own limits, valuation and progress-payment conditions; this is not an approval.

How is an owner-builder loan different?

Owner-builder rules vary by lender and insurer. The example 60% LVR setting is editable and reflects Westpac’s published owner-builder construction cap. Helia has a separate 50% owner-builder LMI limit; neither figure is a market-wide rule.

Why is the on-completion value not just land plus the kit?

The finished value depends on the completed dwelling, location, design, site, quality and valuation method. Enter a reasoned value estimate; the calculator does not add the project cost to land automatically.

Will I need LMI?

LMI may apply above 80% LVR, subject to lender and insurer rules. This calculator does not estimate an LMI premium. An owner-builder project may have a lower insurer limit; obtain a lender and insurer quote.

Does this include interest during the build?

No. It shows post-completion principal-and-interest repayments only. It does not model staged construction interest or drawdowns. Use the separate construction loan calculator for a generic build-period scenario.

Is this an approval?

No. It is an estimate only, not a quote, approval, credit assessment, or tax or financial advice. A lender must assess the contract, valuation, security, borrower and project.